Sunday, October 13, 2019
Iago in William Shakespeares Othello Essay -- William shakespeare Oth
Iago in William Shakespeare's Othello William Shakespeare, born: 1564 died: 1616, is considered one of the greatest writers who has ever lived. He had a unique way of putting things into words. All of his plays, sonnets, and poems have gotten great recognition. But when Shakespeare wrote Othello he created one of the most controversial villains of all times; Iago. He is best described as disturbing, ruthless, and amoral. No other character can even come close to his evil (Iago: The 1). Iago, in the play Othello, is a very intriguing villain. Even though he is often referred to as "Honest" Iago, he lies, cheats, steals, bullies, and even kills just to get what he wants (Iago as 1). Iago starts off being evil when he finds out that Othello gave Cassio the position of lieutenant that he felt he deserved. To take this position from Cassio he must not let his conscience get in his way. This is not a problem with Iago because he has no conscience. Iago is able to manipulate anyone who gets in the way of his goals. He does this over and over during the course of the play. He uses all the characters to destroy Othello. He used the tension that was already existent to bring him down. And he also uses his intense sense of intuition. Iago is an excellent judge of character. He also makes it seem like he posseses characteristics that he really doesn’t have. Iago often wonders why someone would pretend to be something they are not, when in fact that is exactly what he represents. He has many fronts that he can put up. Every character in Othello had a relationship with the different sides of his personality. He uses this to his advantage in the case of Roderigo loving Desdemona. By knowing that Roderigo is madly in love with her, he knows he will do anything to be with Desdemona. Iago says about Roderigo, " Thus do I ever make a fool of my purse;" (1.3.353). By going on what he knows about Roderigo, he is able to get money and jewels from him. He doesn’t even think twice before taking things from someone who supposedly considers Iago to be his friend. Iago is also capable of thinking very quickly in any situation. This makes him able to handle himself when something he does not expect happens. He can recognize the advantages of trust and uses it to gain what he wants. He has it in his mind that if he has everyone's trust no one will ever expect him to be at... ...ll the people that are in a higher position and are more powerful than he is. Iago refuses to cooperate with those people that do posses more power than he does. This is just one of the many examples of Iago’s distorted ways of thinking.      Considering all the hatred and jealousy Iago possesses, how could anyone see good in such a ruthless, merciless sociopath. When William Shakespeare created Iago, he could not have made such an ideal villain. Iago stands for the eponymy of evil. He represents hatred and all that is bad. He lacks any credibility for his motives and takes great pleasure in his ability to destroy the lives of Othello, Desdemona, Cassio, and Emilia. He created all the madness in the play but was never caught until the end finally arrived. Iago said it himself, â€Å" I am not what I am†(1.1.62). He proves this clearly that he seems like he is always watching out for people when really he is out to devastate the lives of so many. Even though Iago was successful in eliminating Othello and the others, he was not victorious in the end because the problems he caused, deaths especially, cannot be resolved. Ironically everything that Iago pretended to be led to his end.
Friday, October 11, 2019
Human Variations in High Altitude Populations :: Tibet Himalayans Adaptation Essays
Human Variations in High Altitude Populations Thesis:The purpose of this paper is to describe the high altitude stresses and the general adaptations made by the Tibetan population in the Himalayas and the Quechua in the Andes.                I Introduction           II Background                     A Quechua People                     B Tibetan People           III General Adaptations                     A Physical                     1 Growth                     2 Development                     3 Core temperature                     4 Extremity temperature                     B Non- Physical                     1 Clothing                     2 Houses                     3 Schedule                V Conclusion      â€Å"Some ten to twenty-five million people (that is less than 1% of the earth’s population) currently make it[high altitude zones] their home(Moran,143).†The adjustment high altitude populations must make are firstly physical and secondly cultural. Although most people adapt culturally to their surroundings, in a high altitude environment these cultural changes alone aren’t enough. Many physical adaptations that reflect â€Å"the genetic plasticity common to all of mankind(Molinar,219)†have to be made to survive and even more than that thrive in this type of environment. In this paper I will describe the high altitude stresses. Along with adaptations made by the populations living in them. The two high altitude populations which I will examine in this paper are the Tibetan people of the Asian Himalayas and the Quechua of the South American Andes. The Quechua are an Indian people who inhabit the highlands of Peru and Bolivia. They speak Quechua, which is a branch of the Andean-Equitorial stock. They show many remnants of Inca heritage by their houses, music, and religion which has pagan rites under the Roman-Catholic surface. Their villages consist of kin groups . Their marriage partners are taken from within each village. Agriculture is the dominant subsistence pattern in the central Andean region but the Nunoa region where the Quechua reside can only support a few frost-resistant crops. Which include bitter potato, sweet potato, and a few grain crops of quinoa and canihua. The rest of the fruits and vegetables of the Quechua come from the eastern mountains on it’s way to the markets. The most important subsistence pattern for the Quechua is stock raising. Which is limited to the few animals that do well in the high altitudes. Their stock include alpacas,llamas and sheep.      In the Himalayas only â€Å"5% of the geographical area(Baker,36)†can be used for agriculture. The main crops are barley, wheat and buckwheat. The crops are grown between 3,500 and 4,300 meters. These few crops are threatened by drought, hail, frost, snow and erosion. The Himalayas also have extensive pasture areas which are used by the nomadic and sedentary peoples. The higher regions have pastures where yak, sheep, and goats are the main animals used.
Topographic Map
MS 217 Dennis Borzakov Class 723 January 15, 2013 Problem HOW IS A TOPOGRAPHIC MAP MADE Hypothesis I think that to make a topographic map you have to see the form of the object from up top. To do this you need a satellite image. These images are called aerial photographs. Using elevation calculators and ground measures cartographers then make topographic maps. Materials †¢ Clay model landform †¢ Water tinted with food coloring †¢ Transparency †¢ Clear plastic storage box with lid †¢ Beaker †¢ Metric ruler †¢ Tape †¢ Transparency marker Procedure 1.Using the ruler and the transparency marker, make marks up the side of the storage box one centimeter apart. 2. Place the clay model into the storage box. The bottom of the box will be zero elevation. 3. Secure the transparency to the top of the storage box with tape. 4. Using the beaker, pour water into the box to a height of one cm. 5. Use the transparency marker to trace the top of the water line o n the transparency. 6. Using the scale 1cm=10m, mark the elevation on the line. 7. Remove the transparency and add water until a depth of 2cm is reached. 8. Map this level on the transparency and record the elevation. . Repeat the process of adding water and tracing until you have the hill mapped on the transparency. 10. Transfer the tracing of the hill onto a white sheet of paper. 11. Use the ruler to transfer the hill from the white sheet of paper to graph paper. Analysis The counter interval of this topographic map is 1cm is equal to 10 m. The distance between contour lines on the map show steepness of a slope on the landform model because the closer the lines are the steeper the hill is, the farther apart the lines are the more the gentle the rising of the hill will be.The elevation of Hill A is 80 meters and the elevation of Hill B is 90 meters. Elevation was presented on the map by the number of counter lines. The one with the most counter lines is the taller one. Conclusion I n this experiment we took on the job of a cartographer. We graphed clay model hills to express elevation. We traced images of the forms from the transparency to the white sheet of paper to express the difference in counter lines.
Thursday, October 10, 2019
Human hand catching an object Essay
ANALYSING From this experiment I have found out that there are different factors that affect the resistance of a wire. The factors that I have investigated are the length and thickness of a wire. In the experiment, as the wire got shorter, the resistance decreased, and if the wire were increased then the resistance would increase too. If the thickness of a wire were to be changed then the thicker the wire, the less resistance and the thinner the wire the more resistance it will have. I have also found out that the resistance is calculated by dividing the voltage by the current. This calculation was used in my experiment and showed that the resistance is roughly constant. If some odd results were obtained, it was because at a low voltage the power packs are inaccurate and at a high current, we might gain a heating effect. Ohm’s law can be proved by the graph due to the fact that the graph has a straight line; therefore it has a constant gradient, meaning a constant resistance whatever current is passing through it, providing the temperature is constant. If the graph were a curved, then that would mean that the resistance was changing. If that were the case the resistance could be found for any point by taking the pair of values (V, I) from the graph and sticking them in the formula R= V/I. (Information obtained from physics revision guide. ) That would be disobeying Ohm’s law. In my opinion, the resistance of the 32- copper wire seemed odd since the thinnest wire is supposed to have the highest resistance. However a good conductor, which is what copper is, will allow current to flow through it easily. Therefore that’s why the ammeter reading for the copper wire, which measures the current, was very high, compared to the reading of the other types of wire. A nichrome wire would have more resistance than a copper wire of the same size, because less current flows through it, making it not such a good conductor. We can also conclude that the thickest wire, type 26, had the highest resistance because less current could flow through it. EVALUATING: This investigation was conducted following the method above. By following those steps, I managed to obtain more than enough readings to plot a graph with and I managed to obtain accurate results, until the wire reached 30cm (TABLE 1). However my previous readings were fairly accurate, which were more enough for me to plot a graph with. I had seven readings when only 6 are needed to plot a graph. The results of the first experiment my group conducted, (TABLE 2) were much more accurate than the second one (TABLE 1). The resistance was very constant, however we did not complete the experiment. We planned to carry it on the next lesson, but it would not have been a fair test because we used a different power pack and the voltage was not the same. We found out that we were getting odd results to our previous ones; therefore we had to start the whole thing again. We made sure we finished that experiment and even had time to conduct another: an investigation to find out whether the thickness of a wire would affect the resistance. Since I only had to investigate five different wires, obtaining five results, this investigation was easier to conduct because there were fewer to do and I knew exactly what I was doing. It took me less time to set up the circuit and it was definitely a fair test. However when it came to the 32-copper wire the resistance was very high. I expected it to be high because it was one of the thinnest wires, however not that high. I suspect I either recorded the wrong reading or because at low voltage the power pack was inaccurate and at high current there was a heating effect. However, as I mentioned in the analysing section, there was a simpler explanation. From previous work, I remembered copper is a very good conductor, therefore the high current reading. In future if I conduct another similar experiment to this one there are some improvements that could be made: I could compare my results with other people to see if they got the same or near enough results. That way I would know whether I was on the right tracks. If I am stuck on connecting the circuit, I could draw a diagram first and follow that. I should finish every experiment the same day; so that I get more accurate results and can compare the results to the results of another experiment, on the same subject and would not have waste time having to start the same experiment again. I could have done some further research and find out what and if there are any other factors that affect the resistance of a wire and then I could have conducted an experiment.
Wednesday, October 9, 2019
Deciding whether to use flexible staffing Case Study
Deciding whether to use flexible staffing - Case Study Example Flexible Staffing Services, FFC, is a late entrant into the staffing industry priding itself in the provision of qualified human resource. Kaiser Manufacturing Company on the other hand is an experienced company operating in the manufacture and sale of agricultural products. The company that has operated for the past fifty ears remained stuck in the traditional system of managing human resource thus resulting in the modern operational stalemate in the company. Kaiser Manufacturing Company, KMC, continues to experience diminish demand for its products while the labor costs in the company continues to rise owing to the fact that the company has an older workforce. Such a workforce boasts a well of experience in the traditional mechanisms of both production and marketing but do not appreciate the changes in the market a feature that validates the company’s dwindling fortunes. The company therefore requires the services of a contemporary staffing company, one that understands the industry and will sustain the provision and effective management of employees at the organization thus enhancing the company’s profitability. Flexible Staffing services provide employees in unique packages that safeguard the interests of the client. The situation at KMC requires a pool of employees hired in appropriate mechanisms in order to low the escalating cost of labor at the company. The Flexible Staffing Services promise the diverse workforce that the company require. The company furnishes its clients with numerous classes of employees qualified in varied sections of an organization including production, management, technical and clerical. KMC requires such a wide range of employees a feature that makes the staffing company essential. The company promises a group of unified employees besides the fact that the company will provide KMC with a large pool of possible employees to choose from (Klemmer, 2009). Among the primary
Tuesday, October 8, 2019
Project Management Assignment Example | Topics and Well Written Essays - 6000 words
Project Management - Assignment Example product developed through the project will provide the necessary support in line with the quality standards set within the jurisdiction that the company operates. The compatibility of the system to Microsoft and Apple provides a platform of operations for the product that embraces technologies by Microsoft and Apple to result into a positive product for the market. These provide the background to project management. All these levels require commitment of resources, which need management and control hence the need for project management. Project management bases on various backgrounds based on the needs of the project developers and company that the project is to serve. Project management relies on three basic principles also considered objectives. These include the objectives of the project, the constraints and the lifecycle under which the project is operational. These guide project managers in planning, scheduling, control and execution of the project. The use of two major techniques hat is the project evaluation technique applicable in review too and the critical path method all depending on the aspects of objectivity, constraint sand lifecycle. As HP aims at delving into the project, the need to consider the objectives of the project, the constraints to expect and the project lifecycle proves vital. A clear definition of project objectives and goals at the beginning of the project provides the project managers with the necessary direction through which the project proceeds. The objectives of the HP project are to develop a tablet whose programs prove compatible with Microsoft and Apple systems to serve elementary school students in various purposes. The objectives draw the line and set the pace under which the project operates. The success of the project depends on the understanding of the project objectives by all members handing the project to ease understanding and execution. Each person needs to understand his or her role in the project development
Monday, October 7, 2019
Final Assignment Chapters 9 & 10 Research Paper
Final Assignment Chapters 9 & 10 - Research Paper Example ees as an opportunity to belittle her boss by stating it was too early to make such an early assessment yet she had not fully understood how politics had been used by Kathryn. It was very clear that everyone was trying safeguard his wellbeing but not the work of the organization’s development (Lencioni, p.25). The tech decision team also lacks significant communication in the sense that when Nick the chief operating officer suggests they acquire the green banana firm in Boston. Upon being questioned by Kathryn about the timing of the project, he responds with arrogance about her role in team building and not industrial technology (Lencioni, p.56). Another essential attribute missing from the tech Decision team that was a necessary for its effectiveness was lack of extensive collaboration. Lack of collaboration is when JR the sales head resigns and cities wasteful meetings as his reason for calling it quits with the company. Also by Mickey deciding to leave as a result of direct criticism for her focus in personal reputation rather than contribution to the team further exhibited lack of active collaboration (Lencioni, p.36). The Decision tech team experienced only the first three of the four stages of team development since we don’t see them working in respect to performing. Kathryn was effective in enabling the team moves through each phase in the following ways. In the forming stage the dominant human relationships are silence, dependence, self-consciousness, and superficiality. These are during the first week upon taking her new position as the C.E.O. She spent most of her early week walking in the halls, holding brief conversations with staff members and direct contacts and maintaining silence in majority of the meetings she attended. Since she was not well accustomed to her new job and proved her dependence by requesting Jeff Shanley to proceed with the weekly staff meetings as the head. She only maintained brief contacts with other employees and walked
Subscribe to:
Posts (Atom)